[ECOS] RE: gdb/insight problem

["Avi Vaknin" <avi at WavionNetworks dot com>]

No.
We tried to work with Insight and not through command line GDB.
Assuming that we can run it in command line GDB, what could be problematic when using Insight?

Avi.

-----Original Message-----
From: Jonathan Larmour [mailto:jifl@eCosCentric.com]
Sent: Wednesday, June 16, 2004 4:38 PM
To: Avi Vaknin
Cc: ecos-discuss@ecos.sourceware.org
Subject: Re: gdb/insight problem


Avi Vaknin wrote:
> Hi Jifl,
> Yes. The program is definitely running and we are sure we connected in the firts 
> place (using File->Target Setup) and set up as a Remote/TCP target, with 
> the appropriate board's IP address/name.

That shared library warning is something I've seen elsewhere, and it's not 
been a problem before. Have you tried command line GDB?

Jifl

> -----Original Message-----
> From: Jonathan Larmour [mailto:jifl@eCosCentric.com]
> Sent: Wednesday, June 16, 2004 4:10 PM
> To: Avi Vaknin
> Cc: ecos-discuss@ecos.sourceware.org
> Subject: Re: gdb/insight problem
> 
> 
> Avi Vaknin wrote:
> 
>>
>>Hi All,
>>
>>We encountered a problem when trying to debug an eCos application.
>>
>>We use Rattler-MPC8248 target from Analogue & Micro company.            
>>                                                               
>>
>>In powerpc-eabi-insight when we connects to target we receives the 
>>warning "shared library handler failed to enable breakpoint"
>>
>>Indeed, we cannot set breakpoints in the code, or single-step. The 
>>program just keeps running.
> 
> 
> The program is definitely running? Are you sure you connected in the firts 
> place (using File->Target Setup) and set up as a Remote/TCP target, with 
> the board's IP address/name?
> 
> Jifl


-- 
eCosCentric    http://www.eCosCentric.com/    The eCos and RedBoot experts
--["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss