Re: [ECOS] Re: Source Debug by Multi-ICE

["David Lewin" <david dot lewin at europe-technologies dot com>]

As I have the same toolchain, I confirm that the
proprietary Arm eXtended File (AXF) is the only
format accepted by ADS and RealView.

 Of course there is no Elf to Axf converter.

Some solutions I propose are :

- try another toolchain/editor : Metaware  accept many formats
- try another JTAG connection  : Raven , Chameleon

Hope this helps

DL

----- Original Message ----- 
From: "Jonathan Larmour" <jifl@eCosCentric.com>
To: "pb.jack" <pb.jack@powerbase.com.tw>
Cc: "eCos discussion" <ecos-discuss@ecos.sourceware.org>
Sent: Wednesday, June 30, 2004 1:52 AM
Subject: [ECOS] Re: Source Debug by Multi-ICE


> pb.jack wrote:
> > Hi all,
> > My platform is GCC+ADS1.2+Multi-ICE 2+ECOS 2, the test program running
> > in good status but don't know why I can't  see the variable value in
> > ADS.
> > Is anybody know how to fix this?
>
> Essentially you can't. ADS does not accept debug info from executables
> produced by GCC.
>
> Jifl
> -- 
> eCosCentric    http://www.eCosCentric.com/    The eCos and RedBoot experts
> --["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine
>
>
> -- 
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss