Re:Re: [ECOS] connect eCos to RedBoot

[Muna Hummady <muna_hummady at yahoo dot com>]

--- Nick Garnett <nickg@ecoscentric.com> wrote:

> Muna Hummady <muna_hummady@yahoo.com> writes:
> 
> > 5- (gdb) target remote /dev/ttyS0
> >     when I'm doing this the PC taget will be
> halted,
> > so     i can do nothing than restart it. but I can
>    
> >         continue the procedure on the host target.
> 
> This makes no sense, it sounds like you are
> resetting the target after
> GDB has connected. Don't do that.
> 
> Can you talk to RedBoot via the serial line using
> HyperTerminal?
> However the next step implies that RedBoot and GDB
> are communicating
> correctly, so there doesn't seem to be a problem.
> 
> > 6- load file.exe
> >    this file will be loaded and the an output
> appear  
> >     showing the size of all .text, .rodata, .data
> and 
> >      the lma for all of them. Also showing the
> > transfer      rate. 
> > 7- continue 
> >    output continuing.. 
> >    and enter eneless loop.
> > 
> > 
> > could you tell me where is the problem and what
> I'm
> > doing to solve it?
> > Is the proceedure true?
> > What I'm doing on the RedBoot side?
> 
> Try running some of the standard test programs. If
> these work then any
> issues with your program are of your own making.
> 
> -- 
> Nick Garnett                    eCos Kernel
> Architect
> http://www.ecoscentric.com/     The eCos and RedBoot
> experts
> 

hello freinds
1- Could you tell me how to talk to RedBoot via the
serial line using HyperTerminal?
2- you didn't tell me why when i'm running continue on
the host, it goes on endless loop?
                            thanks
                            Mrs. Muna M. Hummady



		
__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail 

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss