This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Regarding Flash Address to store ROMRAM startupapplication


On Wed, 2004-08-11 at 14:19, Giri Raja wrote:
> Hi,
>    I was experimenting to run a small application on
> the EB40A board without redboot on it. The idea is to
> make the application boot up by itself when powered
> on. 
> I configured for ROMRAM startup type and disabled the
> 'Work with ROM Monitor' option in the config file.
> I compiled my application with this configuration and
> used OC Demon Flash Memory Programmer to store the
> executable in the flash (this is how I normally do for
> redboot and it works).when I powered it on, it doesn't
> seem to work. My jumper was set to the user position
> and there is absolutely nothing in the flash other
> than the executable I just loaded.
> Can someone please help me out on this.

I found that I needed a few extra things set to make this work:

cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
    user_value 0
};

cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
    user_value 0
};

cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
    user_value 0
};

-- 
Gary Thomas <gary@mlbassoc.com>
MLB Associates


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]