This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
GDB connect via UART failed
- From: "jourdon_shell" <jourdon_shell at 163 dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Thu, 23 Sep 2004 11:03:58 +0800 (CST)
- Subject: [ECOS] GDB connect via UART failed
Dear eCos discussers,
I built a RedBoot[ROM] version to my board. My board uses S3C4510B, and is similar with SNDS100. So I chosed SNDS100 template, and modified memory bank settings for the difference on my board.
The problem is that, now, I can use command line interface via UART0/UART1 to talk with RedBoot. And even can use GDB debug via networking channel. But when I try using GDB to connect RedBoot via UART0/UART1, it never succeed, times out.
What on earth the problem is? Any other options I should set?
Anyone could give me suggestions?
Many many thanks.
BRs
Jourdon Shell
-------------------------------------------------------------------------------------
周杰伦在"第一现场"与你面对面 http://smspop.163.com/special/jay200408/index2.html