This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: need help for EB40A board
- From: Robin Randhawa <robin_singh at gmx dot net>
- To: Ashish Chopra <ash_ecos at yahoo dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Wed, 29 Sep 2004 13:03:57 +0530
- Subject: Re: [ECOS] need help for EB40A board
- References: <20040929055235.84572.qmail@web52505.mail.yahoo.com>
On Tue, 2004-09-28 at 22:52 -0700, Ashish Chopra wrote:
> Somehow I screwed up the bootloader.
Do you mean the Angel Bootloader that comes pre-loaded ?
If so, you might benefit from this link:
http://atmel.com/dyn/resources/prod_documents/EB40A_recovery.zip
> I have Xilinx parallel Cable JTAG with me is it
> compatible with ARM7 boards.
I have used the wiggler product for the EB40a manufactured by mcgregor.
Don't know about this one that you mention. But its worth a shot so long
as you have appropriate software to interact with the on chip JTAG
subsystem over the JTAG cable you mention.
Cheers,
Robin.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss