This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: EPXA10 Redboot problem
- From: Christian Mueller <cmueller at lpr dot e-technik dot tu-muenchen dot de>
- To: Clienti Christophe <cclienti at enssat dot fr>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Sat, 02 Oct 2004 20:34:27 +0200
- Subject: Re: [ECOS] EPXA10 Redboot problem
- References: <200410011457.47550.cclienti@enssat.fr>
hi!
type of config: use the REDBOOT macro, the actual startuptype you'll
see in the configtool is rom
the flasher use is :
exc_flash_programmer.exe -g redboot.hex // you'll have to give the right path
if you did everything right, you will have a redboot.hex under redboot_install/bin, that is the one to flash
no re-linking etc is required..
chris
Clienti Christophe wrote:
Hello,
i would to put redboot on a EPXA10 rev 2.1 board.
i succeed in compiling redboot with configtool but i would like to know how to
put the hex file into the flash memory :
- What type of config : RAM, ROMRAM, REDBOOT ?
- how burn the file with the exc_flash_programmer command line ?
- Must have to re-link the redboot.hex (generated with conftool) with
arm-elf-ld or use arm-elf-objcopy ?
thanks
Christophe Clienti
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss