[ECOS] Re: Probelm while transferring image onto the Target

[Jonathan Larmour <jifl at eCosCentric dot com>]

veena venkatachalam wrote:
> Hello
>
> I am working on AT91EB40A board and i have built the library files successfully.
> Then i built an example from which i got an exe file
>
> arm-elf-gdb -nw hello
> set remotebaud 38400
> target remote com2
>
> here i get an error " inappropriate ioctl for the device"
> I am not able to understand the problem

You should get GDB working, as eCos without a debugger isn't useful.

Perhaps try instead of the last line:
target remote /dev/ttyS1

Did you quit hyperterminal? Hyperterminal is buggy and just disconnecting 
it isn't enough.

> But while doing it through hyperterminal it is connected to com2 only
> but when i run it i get some junk output

By any chance something like +$O then a bunch of random hex digits then a 
hash followed by two digits?
Jifl
--
eCosCentric    http://www.eCosCentric.com/    The eCos and RedBoot experts
--["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss