This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Ecos program output
- From: Miguel J Vega <mserrano at engin dot umich dot edu>
- To: ecos-discuss at sources dot redhat dot com
- Date: Mon, 18 Oct 2004 23:14:52 -0400 (EDT)
- Subject: [ECOS] Ecos program output
I have redboot running on an MPC555 board, with debug set to serial port 1
and diagnostic set to serial port 2. The ecos programs I have built have
been built with the "inherit console" configuration on. Why does redboot
and the ecos programs do I/O through serial port 1? That is supposed to be
the debug port. I expected the I/O to be through the diagnostic port. Is
this the correct behavior?
Thanks,
Miguel J. Vega
FEGI C&DH Team
University of Michigan
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss