This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: which iPAQ for eCos


Thanks for clarifying Andrew.

The port in anoncvs is for the sa1110 based iPAQ. The documentation
for the port says its for the H3600 series.

I guess this is also available in ecos-2.0 release, right?


There is no USB support in RedBoot.

Then I suppose there are serial cables available for 3600's as well!


thanks
-- Abhi



--On Monday, November 15, 2004 8:14 PM +0100 Andrew Lunn <andrew@lunn.ch> wrote:

On Mon, Nov 15, 2004 at 10:59:10AM -0800, Abhi wrote:
Question about support/port of eCos on iPAQ:

Which version/series of iPAQ have eCos supported on them:

The port in anoncvs is for the sa1110 based iPAQ. The documentation for the port says its for the H3600 series.

Also do I always need a serial cable to communicate with the iPAQ once
Redboot is installed (i.e. does Redboot support USB). I am not sure if
3600 series cradle have a serial connector?

There is no USB support in RedBoot.


Andrew





-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]