This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: redboot over VxWorks
- From: Andrew Lunn <andrew at lunn dot ch>
- To: Nickolay <nickolay at protei dot ru>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 10 Jan 2005 13:06:19 +0100
- Subject: Re: [ECOS] redboot over VxWorks
- References: <41E26D8E.7080505@protei.ru>
On Mon, Jan 10, 2005 at 02:57:02PM +0300, Nickolay wrote:
> Hello Guys!
>
> I am newbe to redboot and ecos.
> I has IXDP425 board with installed VxWorks loader.
> Now i should change VxWorks loader to RedBoot loader.
> I successful build cross-compiler gcc/g++ and ecos latest version from
> CVS for IXDP425.
> Now i has redboot.bin image for RAM and can load it to IXDP425 via
> serial port direct to RAM, but what
> address on RAM image(redboot.bin) must be started?
eCos image are position dependant. It has to be loaded at the address
it expects to be loaded. You can then execute it by jumping to the
first instruction.
Take a look at the .ldi file in the hal includes/pkgconf for your
target.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss