This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: redboot on IXDP425
On Tuesday 11 January 2005 16:55, Mark Salter wrote:
> On Tue, 2005-01-11 at 18:47 +0300, Nickolay wrote:
> > Mark Salter wrote:
> > >On Tue, 2005-01-11 at 18:17 +0300, Nickolay wrote:
> > >>Hello Guys!
> > >>
> > >>Anyone know, how i can install redboot on IXDP425 target?
> > >>I has vxWorks bootloader installed, and i need rewrite them or boot
> > >>redboot on them.
> > >
> > >The flash is socketed on the IXDP425, so you can use a device
> > >programmer. The alternative is to use a jtag based flash
> > >programmer.
> > >
> > >--Mark
> >
> > That's true!
> > But maybe anyone know how load redboot via vxworks bootloader?
> > Can i use redboot.bin for this purpose, or redboot.bin is for upgrade
> > redboot from redboot the self?
>
> redboot.bin is just a raw binary image. It needs to get programmed
> to the start of flash. I'm not sure about the vxworks bootloader
> capabilities.
>
> --Mark
Hello
I heard from vxWorks guys - it isn't possibility to write image by vxWorks
bootloader and this bootloader don't configure hardware e.g PCI - Do you have
other loader?
Best Regards,
jerzy
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss