This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: redboot hang problem!!
- From: Eason Lee <easonlee at gmail dot com>
- To: Aniket S Joshi <aniketsj at myw dot ltindia dot com>, ecos-discuss at sources dot redhat dot com
- Date: Thu, 13 Jan 2005 11:56:28 +0800
- Subject: Re: [ECOS] redboot hang problem!!
- References: <s1e53fb1.099@EMAIL>
- Reply-to: Eason Lee <easonlee at gmail dot com>
My other printf worked fine, so can I suppose using correct searial port?
On Wed, 12 Jan 2005 15:17:57 +0530, Aniket S Joshi
<aniketsj@myw.ltindia.com> wrote:
> Hi Eason,
>
> I faced same problem while porting ecos on my target board. I found that Printf was using some different serial port (which is not on my target board) for sending character. When i debugged i found that code is contineously waitting for serial line clear signal of that serial port.
>
> Thanks and regards,
> Aniket Joshi
>
> Senior Software Engineer
> Larsen & Toubro Ltd,
> Embedded System & Software (EmSys),
> KIADB Industrial Estate Hebbal
> Hootagalli, Mysore,
> State: Karnataka,
> India
> PIN: 570018
>
> Ph:+91-821-2402561 Ext:2765/2773
> FAX: +91-821-2403752
> http://www.lntemsys.com
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss