RE: [ECOS] GoAhead web server on eCos

["Somashekhara, Gowda (IE10)" <Somashekhara dot Gowda at honeywell dot com>]

Hi Gary,

I am using a compact flash of size 128MB to store the image and SDRAM of
64MB.
The bios on bootrom initializes the system.
The startup mode is configured to RAM.

I increased the CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE configuration
option to 1638400 from 16384 in memalloc.cdl file and then build the
library. (I referred to article written by Massa).

Hope this gives the clear picture.

PS: I apologies for the multiple copies of mails, I was getting mailer demon
messages while sending (from past 4 hours) hence I tried few extra times... 

Thanks and Regards
Som

-----Original Message-----
From: Gary Thomas [mailto:gary@mlbassoc.com] 
Sent: Thursday, January 20, 2005 9:24 PM
To: Somashekhara, Gowda (IE10)
Cc: eCos Discussion
Subject: Re: [ECOS] GoAhead web server on eCos

On Thu, 2005-01-20 at 08:45 -0700, Somashekhara, Gowda (IE10) wrote:
> Hi,
> 
> I am trying to run goahead web server on ecos for a x86 platform.
> The web server is compiling properly and I downloaded the bin file to
target
> board.
> But when I am running the web server the following message is displayed
and
> web server wont run.
> 
> "PANIC: zinit: Out of memory"
> 
> Can anybody tell me what does this mean? I am using v2.0 ecos packages and
> the n/w adapter is with ns dp83816.

This error means just what it says - eCos has run out of memory trying
to initialize the network environment.  The most likely cause is that
you are trying to use one of the limited configurations (e.g. FLOPPY)

How did you configure eCos?  In particular, what startup mode are you
using?

> 
> Thanks and Regards,
> :-) Som    

BTW sending your question 3 times in as many hours does not improve the
speed or quality of responses (probably the other way 'round!)

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss