This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: EPXA10 eCos and fpga configuration logic
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Christophe Clienti <cclienti at enssat dot fr>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 28 Jan 2005 07:59:47 -0700
- Subject: Re: [ECOS] EPXA10 eCos and fpga configuration logic
- Organization: MLB Associates
- References: <41FA546A.2010406@enssat.fr>
On Fri, 2005-01-28 at 16:04 +0100, Christophe Clienti wrote:
> Hello,
>
> I put the redboot monitor into flash (ebi0) and i upload everytime the
> configuration logic linked with my ecos kernel & Application into ram.
> I would like to know how put the configuration logic (sbi file) into flash
Look at the uE250 port (hal/arm/xscale/uE250) for some ideas.
It uses a couple of FPGA devices which need to be programmed
at boot time.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss