This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: RedBoot Serial port terminal scrron didn't show out.
- From: "Moseley, Drew" <drew dot moseley at intel dot com>
- To: "Lancelot" <lancelotice at gmail dot com>, <ecos-discuss at ecos dot sourceware dot org>
- Date: Thu, 17 Feb 2005 09:18:20 -0700
- Subject: RE: [ECOS] RedBoot Serial port terminal scrron didn't show out.
What are the LEDs doing? Where did you get your RedBoot sources?
Drew
>-----Original Message-----
>From: ecos-discuss-owner@ecos.sourceware.org
>[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Lancelot
>Sent: Thursday, February 17, 2005 4:09 AM
>To: ecos-discuss@ecos.sourceware.org
>Subject: [ECOS] RedBoot Serial port terminal scrron didn't show out.
>
>I am using Intel IQ80331 Evaluation board. I used "Flash Programmer"
>to upgrade redboot by OCDemon. When I upgrade finished, I connect to
>the board by serial prot. But the Redboot screen didn't show in
>hyperTerminal. I also restore system to the default ROM.elf. But it's
>still didn't work. So , can any one give me some hint or tell me how
>to do.
>
>--
>Before posting, please read the FAQ:
>http://ecos.sourceware.org/fom/ecos
>and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss