This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: RedBoot Serial port terminal scrron didn't show out.
The problem just happened with PCI-X 100MHz. When I plug the board on
PCI-X 133MHz, it's work normal.but anyway thx for ur kindly help.
On Fri, 18 Feb 2005 14:18:02 +0800, Lancelot <lancelotice@gmail.com> wrote:
> It's passed when I have used "verify" function. (The elf file is the
> binary file from Intel)
> And the LEDs also run from "SL" to "A1" step.
> It's seem as normal, but I just could not get the correct display on
> hyperTerminal.
> Is it possible cause by the hardware issue ?
>
> On Thu, 17 Feb 2005 21:27:27 -0700, Moseley, Drew
> <drew.moseley@intel.com> wrote:
> > (copied back to the mailing list)
> >
> > There could be many reasons but it is hard to tell from the description
> > you have given.
> >
> > Have you use the flash programmer "verify" function to compare the flash
> > contents with the original elf file?
> >
> > After you flash the board, and power cycle it, to the 7-segment LEDs do
> > anything?
> >
> > Drew
> >
> >
> > >-----Original Message-----
> > >From: Lancelot [mailto:lancelotice@gmail.com]
> > >Sent: Thursday, February 17, 2005 6:43 PM
> > >To: Moseley, Drew
> > >Subject: Re: [ECOS] RedBoot Serial port terminal scrron didn't
> > >show out.
> > >
> > >I just want to know why I can't get the screen text by hyperTerminal.
> > >And I get the RedBoot sources from the Intel.
> > >
> > >I have used Redboot command to upgrade the elf file.It's okey and
> > >normal. But when I used JTAGE, this problem happened. So, I want to
> > >find out why and how to restore.
> > >
> > >On Thu, 17 Feb 2005 09:18:20 -0700, Moseley, Drew
> > ><drew.moseley@intel.com> wrote:
> > >> What are the LEDs doing? Where did you get your RedBoot sources?
> > >>
> > >> Drew
> > >>
> > >>
> > >> >-----Original Message-----
> > >> >From: ecos-discuss-owner@ecos.sourceware.org
> > >> >[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf
> > >Of Lancelot
> > >> >Sent: Thursday, February 17, 2005 4:09 AM
> > >> >To: ecos-discuss@ecos.sourceware.org
> > >> >Subject: [ECOS] RedBoot Serial port terminal scrron didn't show out.
> > >> >
> > >> >I am using Intel IQ80331 Evaluation board. I used "Flash Programmer"
> > >> >to upgrade redboot by OCDemon. When I upgrade finished, I connect to
> > >> >the board by serial prot. But the Redboot screen didn't show in
> > >> >hyperTerminal. I also restore system to the default
> > >ROM.elf. But it's
> > >> >still didn't work. So , can any one give me some hint or tell me how
> > >> >to do.
> > >> >
> > >> >--
> > >> >Before posting, please read the FAQ:
> > >> >http://ecos.sourceware.org/fom/ecos
> > >> >and search the list archive:
> > >http://ecos.sourceware.org/ml/ecos-discuss
> > >> >
> > >> >
> > >>
> > >
> >
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss