This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
The rebuild image from source code.
- From: Lancelot <lancelotice at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Wed, 2 Mar 2005 14:47:30 +0800
- Subject: [ECOS] The rebuild image from source code.
- Reply-to: Lancelot <lancelotice at gmail dot com>
hi, guy
I have built a redboot image file from intel release redboot source
codes. I can't used fis and other commands in this rebuilt image, but
I can used those commands in the built image from intel release.
There are six item inactive or disable in the configtool GUI program.
Shall I enable or active them? Or I only need to enable or active them
when I used eCos ? In other word, if I just used redboot , I don't
need those item to be enable or active ?
CYGPKG_IO_SERIAL_GENERIC_16X5X
CYGPKG_IO_SERIAL_ARM_iop33x
CYGPKG_DEVS_ETH_INTEL_I82544
CYGPKG_DEVS_FLASH_STRATA
CYGPKG_DEVS_FLASH_iq8033x
CYGPKG_DEVS_ETH_ARM_iq8033x
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss