This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: The rebuild image from source code.
- From: "Moseley, Drew" <drew dot moseley at intel dot com>
- To: "Lancelot" <lancelotice at gmail dot com>, <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 2 Mar 2005 09:24:08 -0700
- Subject: [ECOS] RE: The rebuild image from source code.
If you use the standard config options:
$ ecosconfig new iq8033x redboot
$ ecosconfig import
$ECOS_REPOSITORY/hal/arm/xscale/iq8033x/current/misc/redboot_ROM.ecm
You should have everything working just fine.
Drew
>-----Original Message-----
>From: Lancelot [mailto:lancelotice@gmail.com]
>Sent: Tuesday, March 01, 2005 11:48 PM
>To: ecos-discuss@ecos.sourceware.org
>Subject: The rebuild image from source code.
>
>hi, guy
>
>I have built a redboot image file from intel release redboot source
>codes. I can't used fis and other commands in this rebuilt image, but
>I can used those commands in the built image from intel release.
>There are six item inactive or disable in the configtool GUI program.
>Shall I enable or active them? Or I only need to enable or active them
>when I used eCos ? In other word, if I just used redboot , I don't
>need those item to be enable or active ?
>
>CYGPKG_IO_SERIAL_GENERIC_16X5X
>CYGPKG_IO_SERIAL_ARM_iop33x
>CYGPKG_DEVS_ETH_INTEL_I82544
>CYGPKG_DEVS_FLASH_STRATA
>CYGPKG_DEVS_FLASH_iq8033x
>CYGPKG_DEVS_ETH_ARM_iq8033x
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss