This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: i386 problem

From: Andrew Lunn <andrew at lunn dot ch>
To: Gon?alo Antunes <gmma at gmma dot net>
Cc: ecos-discuss at sources dot redhat dot com
Date: Wed, 27 Apr 2005 07:34:32 +0200
Subject: Re: [ECOS] i386 problem
References: <200504262003.j3QK3dex009649@router.bonfrer.thuis> <004801c54abe$f9cb0240$0200a8c0@pcgoncalo>

On Wed, Apr 27, 2005 at 01:20:52AM +0100, Gon?alo Antunes wrote:
> Hi
> 
> I started my config.ecc with the i386realtek template.
> added the HTTP, CPuload, FreeBSD, networking, and common ethernet packages..

Use the net template as a basis and then add http and cpuload. 

This might help, but it might not. 

> and when I do the 'make tests" I get an error...
> 
> I'm using the startup method 'FLOPPY' and I get the following error:
> 
> /home/gmma/config_install/lib/vectors.o:/tmp/ccfRQjJM.s: undefined reference
> to 'hal_saved_interrupt_state'
> make: leaving directory '/home/gmma/config_build'
> collect2: ld returned 1 exit status
> 
> if  I  change the startup method to RAM, the error does not appear...
> I really need to have it running from the FLOPPY...

What have you found out while debugging the problem? Its been a few
days since you posted this the first time so you have had time to do
lots of testing....

        Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Follow-Ups:
- Re: i386 problem
  - From: Gonçalo Antunes

References:
- RE: eCos Loader
  - From: David Bonfrer
- i386 problem
  - From: Gonçalo Antunes

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]