This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Building binutils
- From: Gary Thomas <gary at mlbassoc dot com>
- To: "Slaughter, Richard" <Richard dot Slaughter at aei dot com>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 06 May 2005 17:13:51 -0600
- Subject: Re: [ECOS] Building binutils
- References: <F4AEA51B51E97444B6B91C9C7C3F7476D8EA28@bssexc02.aei.com>
On Fri, 2005-05-06 at 14:46 -0600, Slaughter, Richard wrote:
> I'm trying to build an arm tool chain for ECOS per the build
> instructions.
>
> I have a fresh install of cygwin and all the recommended sources.
>
>
>
> Each time I try to build the binutils-2.13.1 I get the following
> error message from the make.
>
>
>
> This seems to be a problem with the version of makeinfo.? I'm using
> version 4.8 of makeinfo.
>
>
>
> make[4]: Leaving directory `/buildbin/binutils/doc'
> make[3]: Leaving directory `/buildbin/binutils/doc'
> rm -f config.texi
> echo '@set VERSION 2.13.1' > config.texi
> makeinfo -I /binutils-2.13.1/binutils/doc
> /binutils-2.13.1/binutils/doc/binutils.texi
> /binutils-2.13.1/binutils/doc/binutils.texi:51: Unknown index `ky'
> and/or `cp' in @synindex.
> makeinfo: Removing output file `/buildbin/binutils/doc/binutils.info'
> due to errors; use --force to preserve.
> make[2]: *** [binutils.info] Error 1
> make[2]: Leaving directory `/buildbin/binutils/doc'
> make[1]: *** [install-recursive] Error 1
> make[1]: Leaving directory `/buildbin/binutils'
> make: *** [install-binutils] Error 2
> make: Leaving directory `/buildbin'
>
>
>
>
>
> I've tried several different version of binutils with the same results
Have you asked about this from the Cygwin folks? This really has
nothing to do with eCos - we just use the tools and tell you what
worked to build them [for us].
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss