This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Thread not starting!
On Mon, 2005-06-06 at 17:27 +0530, Raja Mallik wrote:
> Hi again,
>
> We have use "default" option as template!
>
> these are the following packages:
>
> here you see the "ARM9 SCP develboard" which is a customized taken from
> exculibar template..
>
Have you verified that the standard tests run? Since this is a
"customized" port, you should do that first. If problems are
experienced, then you'll know what to look at.
> Packages!
>
> ARM common HAL
> ARM9 SCP develboard
> ARM9 Variant
> c library
> common error code support
> Dynamic memory allocation
> I/o sub system
> ISO C and POSIX infrastructure
> ISO C library date/time functions
> ISO C library general utility functions
> ISO C library internationaliztion
> ISO C library non local jumps
> ISO C library signals
> ISO C library standard inpu/output
> ISO C library string functions
> ISO Environment startup/termintaion
> Infrastructure
> Math Library
> Serial device drivers
> Wall clock device framwork
> ecos common HAL
> eCos Kernel
>
>
> regards
> raja
>
>
> On Mon, 2005-06-06 at 17:16, Gary Thomas wrote:
> > On Mon, 2005-06-06 at 17:08 +0530, Raja Mallik wrote:
> > > Hi again,
> > >
> > > Please find the tarces.txt and twothreads.c file attaced
> > > Let me know where am I going wrong?
> > >
> > > regards
> > > Raja
> > > On Mon, 2005-06-06 at 16:14, Gary Thomas wrote:
> > > > On Mon, 2005-06-06 at 16:01 +0530, Raja Mallik wrote:
> > > > > hi
> > > > >
> > > > > I am trying to run a thread application.by calling cyg_thread_create
> > > > > function.
> > > > >
> > > > > In the configtool, I have enabled "ASSERT" and while loading the
> > > > > application to my board, I get this messages!
> > > > >
> > > > > I am not able understand why the thread is not getting started..
> > > > >
> > > > > Kindly share your views..
> > > >
> > > > Did you start the scheduler? Maybe you could show us your code
> > > > instead of just this trace (it's hard to tell what you've done
> > > > wrong, all we can see are the results)
> >
> > How did you configure your kernel (what template did you use)?
>
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss