This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
adding a new i2c device
- From: "" <clifford dot joseph at clarinox dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Wed, 15 Jun 2005 13:19:51 +1000
- Subject: [ECOS] adding a new i2c device
Hi
I am trying to implement an i2c transfer.
I have successfully added the hardware package CYGPKG_IO_I2C to my configuration file. (.ecc)
Iam working on the eb40a evaluation board which has already an i2c device at24c512 eeprom.
I am using arm-elf-gcc version 3.2.1
As described I have added this in my plf_io.h
#define HAL_I2C_EXPORTED_DEVICES \
extern cyg_i2c_bus cyg_i2c_xyzzy_bus; \
extern cyg_i2c_device cyg_i2c_wallclock_ds1307; \
extern cyg_i2c_device cyg_i2c_eeprom;
and in my main.cpp file I have implemented the following function
static cyg_bool
hal_alaia_i2c_bitbang(cyg_i2c_bus* bus, cyg_i2c_bitbang_op op)
{
cyg_bool result = 0;
switch(op)
{
case CYG_I2C_BITBANG_INIT:
{
}
case CYG_I2C_BITBANG_SCL_HIGH:
{
}
?..
?..
?.
?..
.
}
return result;
}
I am creating a device by using the Macro
CYG_I2C_DEVICE(cyg_i2c_eeprom, cyg_i2c_xyzzy_bus, 0xA0, 0x00,CYG_I2C_DEFAULT_DELAY);
Am I doing it the way it should be done because I get a compile error
parse error before `.' token
at the line wherever I call this macros.
thank you
clifford
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss