This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: thread info in gdb when using a bdm
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Will Wagner <will_wagner at carallon dot com>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Thu, 07 Jul 2005 04:20:45 -0600
- Subject: Re: [ECOS] thread info in gdb when using a bdm
- References: <42CD0123.2020600@carallon.com>
On Thu, 2005-07-07 at 11:17 +0100, Will Wagner wrote:
> Am using an Abatron BDM with our powerpc board. We are not running redboot.
>
> Was wondering if anyone had written user defined commands for gdb to
> display thread info. Have started on this and managed to get basic
> thread info out but was wondering if anyone had written this already?
To do this in a general fashion requires client-side support.
Such support was written for the ARM Multi-ICE - you could look
at how I did it by examining the hal/arm tree.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss