This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
"Fis init" failed on EB40A
Hi all,
I have some problem with flash and fis commands.
I' using the EB40A with the redboot versio
RedBoot> version
RedBoot(tm) bootstrap and debug environment [ROM]
SRI release, ATMEL bootstrap v2.20 - built 11:05:22, Mar 6 2002
Platform: Atmel AT91/EB40 (AT91R40807 ARM7TDMI)
Copyright (C) 2000, 2001, Red Hat, Inc.
RAM: 0x00000000-0x00040000, 0x00009b98-0x0002f000 available
FLASH: 0x01000000 - 0x01200000, 32 blocks of 0x00010000 bytes each.
RedBoot>
when I tried to make the command "fis init' this is the result:
RedBoot>
RedBoot> fis init
About to initialize [format] FLASH image system - are you sure (y/n)? y
*** Initialize FLASH Image System
Warning: device contents not erased, some blocks may not be usable
... Erase from 0x011f0000-0x01200000: $T0a0f:80018001;0d:e43d0000;#7b
and I have to reset the board.
Any suggestions?
Thanks in advance
Jaws
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss