This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
configtool help needed
- From: Steve Wheeler <swheeler at vestatech dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Tue, 02 Aug 2005 13:41:36 -0600
- Subject: [ECOS] configtool help needed
I'm working on a platform HAL for an LPC2292-based board, and I'm running
into a problem with configtool on a Windows XP/Cygwin platform. When I
select BUILD, I get a series of errors reporting that various procedures
are "defined both normally and as an alias."
I searched for that error message in the message archives, and found the
advice to upgrade my tools. I did that and changed the build tool path in
configtool to point to the new tools, but it had no effect. However, I
discovered that setting the appropriate search path in a Cygwin command
window and executing make from the command line produced a build without
errors.
This tells me that configtool isn't using the build tool path I give it. I
was presuming that it was, because it would tell me if I pointed it to a
directory that didn't have the tools in it. Is there something unobvious I
need to know to make it work, or do I just have to ignore configtool and
work from the command line?
Also, when I select "Configuration Tool Help" from the Help menu, it tells
me "c is not a registered protocol." I've installed from scratch twice
already - how do I get access to the online help?
--
Steve Wheeler
Vesta Technology, Inc.
This e-mail was scanned for viruses using BitDefender
Sent by 602Pro LAN SUITE - http://www.software602.com/
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss