This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
exec vmlinux from redboot
- From: Jon Ringle <ml dot ecos at ringle dot org>
- To: ecos-discuss at sources dot redhat dot com
- Date: Fri, 12 Aug 2005 00:16:01 -0400
- Subject: [ECOS] exec vmlinux from redboot
- Reply-to: ml dot ecos at ringle dot org
Hi,
I'm working on porting eCos/Redboot to our platform. I used as a template for
the port the edb7xxx platform. I managed to get the flash on my platform
working (Intel 28F160B3) and got the ethernet operational.
Now I am trying to load a linux kernel and have run into a snag. It seems that
the execution goes into do_exec() ok, but something goes wrong in the
trampoline code at the end of do_exec(), since I get no further output.
Below is a sample session. Does anyone have any ideas on how to troubleshoot
this?
Thanks,
Jon
CS8900A[0x40000300] - type: 0x630e, rev: 0x0800
CS8900 - status: 0x02d6 (EEPROM present)
Got EEPROM ESA
ESA 08:88:12:34:56:78
Ethernet eth0: MAC address 08:88:12:34:56:78
IP: 172.22.64.253/255.255.0.0, Gateway: 172.22.0.1
Default server: 172.22.0.1
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 22:19:08, Aug 11 2005
Platform: Comdial MP1000 (ARM 720T)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
RAM: 0x00000000-0x00fd7000, [0x0000cae0-0x00fb4000] available
FLASH: 0xe0000000 - 0xe0800000, 32 blocks of 0x00020000 bytes each.
RedBoot> load -h 172.22.64.255 vmlinux
Using default protocol (TFTP)
Type: 2, Machine: 40, Version: 1, Entry: 0xc0038000, PHoff: 0x00000034/32/1, SHoff: 0x0014f8a8/40/9
Program header: type: 1, off: 0x00008000, va: 0xc0038000, pa: 0xc0038000, len: 1332020/1816488, flags: 7
Entry point: 0xc0038000, address range: 0xc0038000-0xc017d334
RedBoot> exec
Using base address 0xc0038000 and length 0x00145334
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss