This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Redboot out of sdram for MPC8280
- From: Oren Laskin <laskin at gmail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 12 Sep 2005 14:09:57 -0700
- Subject: [ECOS] Redboot out of sdram for MPC8280
- Reply-to: oren at alumni dot cmu dot edu
I have a custom MPC8280 board that is set up very similar to the A&M
Rattler 8280 board that currently runs Redboot. The MPC8280 custom
board has its own bootloader that I can use to load programs to sdram
at a higher address. I can't load the Redboot RAM(built for the
Rattler) to 0x40000 where the elf is linked to using the bootloader,
but I can load it to 0x800000. How do I change Redboot to link at
address 0x800000 instead?
Also is it possible to test ROM+RAM builds out of sdram only before
programming flash?
Thanks,
Oren
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss