This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Help on ecos linux Synthetic target
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Sridhar Sridhar <ksridhar231 at gmail dot com>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 28 Oct 2005 14:27:10 -0600
- Subject: Re: [ECOS] Help on ecos linux Synthetic target
- References: <a4d332ad0510281251x306da7a4n106a7a319ccb98b5@mail.gmail.com>
On Fri, 2005-10-28 at 12:51 -0700, Sridhar Sridhar wrote:
> Hi,
> Am new to eCos. Down loaded eCos-2.0 from eCos site.
> I dont have any other Hardware/Target to test and run so I would like
> to work on Linux synthetic target.
> 1)My pc is Redhat linux2.4 on i686.
> 2)Opened config tool and set the BUILD TOOLS path as
> /opt/ecos/gnutools/i386-elf/bin and USER TOOLS path as /bin
> 3)eCos repository path as /opt/ecos/ecos-2.0
> 4)Chose Build TEMPLATE as Linux Synthetic Target with default configuration
> 5)I got two unsatisfied conflicts as
> (a) CYGPKG_HAL_SYNTH (b)CYGPKG_HAL_SYNTH_I386 checked both
> and continue.
> 6)Library and save i got the follwoing Please see the attachment. I
> dont know am i right so far.
> Appreciate any help.
Best to start over with the code from CVS (2.0 is more than 3 years
old and *lots* of things have been fixed)
http://ecos.sourceware.org/anoncvs.html
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss