This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: J3 flash lockbits across reset
On Thu, 2006-01-12 at 09:44 +0100, Andrew Lunn wrote:
> On Thu, Jan 12, 2006 at 03:33:03AM -0500, alfred hitch wrote:
> > Hi,
> >
> > I am confused on what is the correct behavior across power resets
> > (of hardware) for J3 flash'es.
> >
> > 1) Will all sectors which were locked before power reset, remain so ?
> >
> > I am confused by some posts on net, saying they get locked (all) by
> > default across resets (irr. of before power reset status)
> >
> > Some say, it is unlocked (all blocks )by default across resets.
> >
> > I dont think flash should change status across resets. It should
> > preserve whatever I locked before reboot and vice versa.
>
> The data sheet for the chip is the best source of answer for this
> question.
>
The J3 devices are different from most other FLASH devices - all
sectors are *always* locked after a device reset. This is just how
the hardware works.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss