This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: There is a way to change a 'fconfig' redboot value from a linux program
- From: David Vrabel <dvrabel at arcom dot com>
- To: Gary Thomas <gary at mlbassoc dot com>
- Cc: thierry langlais <thierry dot langlais at efixo dot com>, eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 19 Apr 2006 10:07:56 +0100
- Subject: Re: [ECOS] There is a way to change a 'fconfig' redboot value from a linux program
- References: <1145376176.13516.7.camel@DEV01> <1145376552.17193.42.camel@hermes>
Gary Thomas wrote:
>
> In Linux, you could use MTD to access the 'fconfig' data.
Note that by default if you're using a combined FIS/fconfig block then
both FIS and fconfig will be read-only from Linux.
David Vrabel
--
David Vrabel, Design Engineer
Arcom, Clifton Road Tel: +44 (0)1223 411200 ext. 3233
Cambridge CB1 7EA, UK Web: http://www.arcom.com/
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss