This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Fw: Spam-F: memory map problem


you also nee to configure  files in 
eCos\packages\hal\arm\arm9\excalibur\current\include\pkgconf (*.ldi, *.h): 
memory layout.  Refer to an ecos manual user in chapter "porting a new 
plateform" and/or the GNU linker manual.
hope this help you!
Fall Birahim
bfall@scmmicro.com



"vasantha.rajan" <vasantha.rajan@cranessoftware.com> 
Sent by: ecos-discuss-owner@ecos.sourceware.org
24/04/2006 16:23

To
ecos-discuss@ecos.sourceware.org
cc

Subject
Spam-F: [ECOS] memory map problem






Hi all,

I have some doubts in memory mapping done in eCos.

We use arm excalibur board for our project.

In our project the FPGA write some data to the DPRAM and that particular 
data 
should be retrived by the the processor,but  the processor unable to read 
the 
data and in fact it does not read the correct address of the dpram.
 
we have defined the DPRAM address in excalibur .h file as
#define EXCALIBUR_DPRAM0_BASE     0x100000 
#define EXCALIBUR_DPRAM1_BASE     0x140000 


I think in our code we are not doing proper memory mapping for dpram we 
use 
and also we dont know how to do it and where all to make change.

plz any one can help us to come out of this problem.

Thanks in advance

vasanth


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss




-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]