This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: Write to Data bus in MPC565
- From: "Rycerz Roman-G11565" <roman dot rycerz at motorola dot com>
- To: "Praveen Prabhakar, Bangalore" <pprabhakar at hcl dot in>, <ecos-discuss at ecos dot sourceware dot org>
- Date: Thu, 4 May 2006 11:10:52 -0500
- Subject: RE: [ECOS] Write to Data bus in MPC565
Praven
I'm assuming you have it setup for an external data bus.... To
get it go outside
You have to have a CS configured and then just write data to and
address in that range
Roman
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Praveen
Prabhakar, Bangalore
Sent: Thursday, May 04, 2006 5:08 AM
To: ecos-discuss@ecos.sourceware.org
Subject: [ECOS] Write to Data bus in MPC565
Hello All ,
i wanted to write data into Data bus of MPC565.
For this i have set 'SC' bit in SIUMCR Register which will set
the databus as data or Gpio
i have set this as data .
Next how to write into the data bus ?
Thanks
Praveen
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss