Hi.
Thanks.
Actually my current problem is that if I use configtool, I get the
following error upon compilation :
arm-elf-gcc -finline-limit=7000 -mcpu=arm7tdmi -mno-short-load-words -Wall
-Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual
-g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -I/ecos-e/Projets/eCOS/Tests/OlimexLPC2106PPP/ecos_install/include
-I/opt/ecos/ecos/packages/hal/arm/arch/current -I/opt/ecos/ecos/packages/hal/arm/arch/current/src
-I/opt/ecos/ecos/packages/hal/arm/arch/current/tests -I. -Wp,-MD,arm.tmp
-o hal_mk_defs.tmp -S
/opt/ecos/ecos/packages/hal/arm/arch/current/src/hal_mk_defs.c
make[1]: Leaving directory
`/ecos-e/Projets/eCOS/Tests/OlimexLPC2106PPP/ecos_build/hal/arm/arch/current'
cc1: error: invalid option `no-short-load-words'
make: Leaving directory
`/ecos-e/Projets/eCOS/Tests/OlimexLPC2106PPP/ecos_build'
cc1: warning: command line option "-Woverloaded-virtual" is valid for
C++/ObjC++ but not for C
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but
not for C
make[1]: *** [arm.inc] Error 1
make: *** [build] Error 2
whereas if I compile using make in the cygwin shell, it works.
Apparently configtool isn't using the correct cc1 compiler. Where can I
configure this?
In advance, thanks.
Ram Sudhir Tadavarthi a écrit :
Hi,
Configtool is Graphical tool and ecosconfig is command line tool. You can
use either as per your convenience. I prefer to use configtool. IMHO both
should provide same results though I never tried to use ecosconfig tool
much.
Warm regards,
ram
-----Ursprüngliche Nachricht-----
Von: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] Im Auftrag von Emmanuel
Viollet
Gesendet: Mittwoch, 10. Mai 2006 10:25
An: ecos-discuss@ecos.sourceware.org
Betreff: [ECOS] Ecosconfig and configtool
Hi.
Under Windows, which tool am I supposed to use? ecosconfig or configtool?
I see that the two tools do not produce the same results (different
directory structures for instance).
Is this normal?
In advance, thanks.
--
Emmanuel Viollet
Software engineer
Webdyn
e-mail : Emmanuel.Viollet@webdyn.com
Tel : +33 (0)1 39 04 29 55
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss