[ECOS] help:problem running ecos application

[Rohit Pandita <pandi008 at umn dot edu>]

Hi all,
Im trying to run a simple eCos application in target RAM. When I try to 
load the executable through GDB it fails to load .text section to LMA 
0x0080 0000 (Ext.RAM base address) with msg "packet 
error,continuing...". Im presuming that this is an illegal operation 
since RedBoot_ROM would have copied the VSR table to this location 
(correct me if mistaken). Does anything look suspicious here?

eCos was configured for RAM startup, inherit  console settings. Target: 
PhyCore555. Thanking in advance.

Regards,
Rohit

objdump showed section header info,

Idx     Name            size           VMA            LMA            
File Off        Algn
0     .vectors      00000000  0x00800000   0x00800000    2b34a         2**0
1     .text             183f0       0x00800000    0x00800000    10000   
    2**2

......................

Disassembly,

00800000<__exception_reset>:
   800000:    ........................    lis      r3,128
   800004:    ........................    ori     r3,r3,16
   800008:    ........................    mtlr    r3
   80000C:   ........................    blr

00800010<_start>:
   800010:    ........................    lis      r3,0
   800014    .........................    ori     r3,r3,12290

......
....
..


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss