This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: rltk8139 support
Surendra wrote:
Hi Gary,
I have downloaded the rltk8139 folder from the CVS. It contains "cdl"
and "include" directories only. There is no "src" directory.
I found rltk8139.tgz attachment file in the mailing list. It contains
the if_8139.c and if_8139.h files. By making few changes to these
files I was able to build the Redboot.
You shouldn't have to go through this trouble - just upgrade your
*entire* eCos source tree (not just the RTLK piece) and then you
can simply build using the pc_rltk8139 target.
I was able to connect gdb to the target. However when the (gdb) load
command is issued the target dies and the system reboots.
Any ideas?
Regards
Surendra
On 7/19/06, Gary Thomas <gary@mlbassoc.com> wrote:
Surendra wrote:
> Dear All,
>
> I have downloaded ecos for i386 target from the follwoing source.
> wget --passive-ftp
ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl
> sh ecos-install.tcl
>
> My PC has Realtek 8139 NIC. I intend to build Redboot with ethernet
> support, but I could not find any files related to Realtek 8139.
>
> Can anyone tell me where I can find Realtek 8139 files?
eCos 2.0 (the version you downloaded) does not have this support. You
need to update your eCos source repository to the latest CVS.
http://ecos.sourceware.org/anoncvs.html
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss