This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RedBoot config parameter mismatch
- From: "Marcello Presulli" <m dot presulli at keytronix dot com>
- To: <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 9 Aug 2006 16:31:42 +0200
- Subject: [ECOS] RedBoot config parameter mismatch
Hi all,
i have the following situation:
If I run my board (opus103) with the "original" RedBoot loader the
config parameters (fconfig -l) like
baudrate=115200,bootp=true and so on are recognised correctly while
booting,
but when I flash my board with the latest RedBoot loader then the
RedBoot config parameters are not
recognised (e.g. baudrate=9600,bootp=false) even if I reinitialise the
config section with fconfig -i again.
Could someone help me in this case ?
Thx,
Marc
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss