This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Am Donnerstag, 28. September 2006 23:15 schrieb Ray Duran: > Hello, > > I am a new to the eCos community. > > I followed the commands on the eCos webpage > > wget --passive-ftp ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl > > Then invoked installation tool > > sh ecos-install.tcl > > I followed the commands but did NOT select pre-built GNU toolchain as I > had already > Downloaded a pre-built GNU ARM toolchain. > > After selecting a mirror-site everything seemed fine and I got a > installation complete message. > > So, I thought my next step was to launch the configtool by invoking > configtool.exe, but nothing happens. > > I did a little research on the mailing list and saw some sort of related > problems that say building the > Config tool is "tricky" and that there are known problems when running > against Cygwin 1.5.10 or later( which > applies to me). What am I missing? The procedure outline in the link > http://www.ecoscentric.com/devzone/configtool.shtml > seems to reference the CVS version. Is there a problem invoking the > Config tool with the non-CVS release? > > Any help or tips greatly appreciated, Your problem seems similar to one recently discussed, read Andrews answer here: http://sourceware.org/ml/ecos-discuss/2006-09/msg00116.html Regards, Lars Poeschel
Attachment:
pgp00000.pgp
Description: PGP signature
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |