This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Help porting AT91SAM7A2
- From: Gary Thomas <gary at mlbassoc dot com>
- To: "Meiring, H, Mnr <meiring at sun dot ac dot za>" <meiring at sun dot ac dot za>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Mon, 09 Oct 2006 05:16:49 -0600
- Subject: Re: [ECOS] Help porting AT91SAM7A2
- References: <FC829C66C7DA824A96A893C28F1B7AD969E878@STBEVS01.stb.sun.ac.za>
Meiring, H, Mnr <meiring@sun.ac.za> wrote:
Hi, I am attempting to port ecos to an Atmel AT91SAM7A2 using the the
AT91 EB40 templates as base reference(I assume it is the closest target
template available).
After changing file names and CDL scripts as described in the platform
porting guide, I must change the memory layout etc. They however
strongly recommend using the cofig tool to edit this properties. This
option according to the ecos manual should be available at
View->Toolbars->Memory Layout menu item, but there is no such option and
I want to do this right without manually editing the mem files.
I am running UBUNTU Linux (debian based) and installed ecos version 2
and its config tool version 2 from the available debian packages that is
available. Is there an easy way to get that menu option visible for me
or is recompilation from source the only way? And will that provide me
with that menu option?
Ignore the comments - there hasn't been a working memory layout tool
for more than 5 years :-( So, simply edit the .ldi and .h files to
match your platform.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss