This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Build tree generation
- From: Gary Thomas <gary at mlbassoc dot com>
- To: "Meiring, H, Mnr <meiring at sun dot ac dot za>" <meiring at sun dot ac dot za>
- Cc: ecos-discuss at ecos dot sourceware dot org
- Date: Fri, 10 Nov 2006 06:01:12 -0700
- Subject: Re: [ECOS] Build tree generation
- References: <FC829C66C7DA824A96A893C28F1B7AD969E87C@STBEVS01.stb.sun.ac.za>
Meiring, H, Mnr <meiring@sun.ac.za> wrote:
Hi,
According to me the build tree command in the GUI ecosconfig tool main tasks is to generate the needed header and make files required to build ecos as are described in the *.cdl files. I know that the same end result can be obtained by using the command line as follows:
$ ecosconfig new <targetname>
$ ecosconfig tree
$ make
I want to know in which order the cdl files are processed, or what exactly happens in the $ ecosconfig tree command(I only have the binary), it have to start at a point and end at another. Any advice on this matter will be welcome.
What do you mean by "it have to start at a point and end at another"?
Why not download the sources? If you have a binary, you are most
certainly entitled to the sources as well (GPL!)
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss