This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: Modifying a board support package
- From: Gary Thomas <gary at mlbassoc dot com>
- To: "Paul D. DeRocco" <pderocco at ix dot netcom dot com>
- Cc: eCos Discuss <ecos-discuss at ecos dot sourceware dot org>
- Date: Wed, 06 Dec 2006 05:05:01 -0700
- Subject: Re: [ECOS] Modifying a board support package
- References: <NEBBKHCFDGIGIJEHDJFCAEHMGGAB.pderocco@ix.netcom.com>
Paul D. DeRocco wrote:
I'm working with an EB40A ARM7 eval board that is set up a little different
from the way it was out of the box, and the configuration options for the
standard HAL package don't cover the changes. My board has a slightly
different flash memory, which requires a source code tweak, and has some
extra SRAM soldered to the board, which isn't listed in the standard memory
map.
It looks like what I want to do is copy the packages/hal/arm/at91/eb40a tree
to a different name, and make some changes to the source, headers, and CDL
files. However, being new to this, it isn't obvious what else I need to do.
1) Should I put my modified HAL in an adjacent directory, like
packages/hal/arm/at91/eb40a_mod? Or is it cleaner to put it somewhere
completely different, under my home directory somewhere?
2) Regardless of where I put it, how do I get my new package to appear in
the list of packages in the config tool?
3) And what specific change is needed to get it to put its temporary build
files into foo_build/hal/arm/at91/eb40a_mod, rather than
foo_build/hal/arm/at91/eb40a?
If your board is truly a derivative of a "standard" platform that's
already in eCos, I think it would be better to make additions, changes,
etc to the extant source files. Simply make your changes depend on
CDL options. Then you can pass them back to us and we'll incorporate
them into the public tree [if you so desire]
If you do choose to clone the platform, do it right alongside the
existing one as in 'packages/hal/arm/at91/eb40a_mod', but in my mind
this is a less desirable choice. Read the 'porting guide' section
of the documentation for a complete step-by-step on how to do this.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss