This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.
Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index] Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]
February 28, 2007
February 27, 2007
| 21:28 | RE: SPI problem on AT91EB55 | Nicolas Brouard |
| 21:13 | RE: SPI usage | Nicolas Brouard |
| 12:06 | Re: Proper Thread Environment (was Re: SPI usage) | Gary Thomas |
| 10:09 | RE: SPI problem on AT91EB55 | Chris Zimman |
| 09:25 | SPI problem on AT91EB55 | Julien Stéphane |
| 04:56 | Proper Thread Environment (was Re: SPI usage) | Chuck McManis |
February 26, 2007
| 15:01 | RE?: [ECOS] SPI usage | Julien Stéphane |
| 14:57 | Re: SPI usage | Gary Thomas |
| 14:51 | SPI usage | Julien Stéphane |
| 14:49 | SPI usage | Julien Stéphane |
| 14:00 | Re: config tool problem | Andrew Lunn |
| 13:52 | Re: SPI support for AT91SAM7XEK. | Andrew Lunn |
| 13:37 | Re: IDE/ATA Support in Ecos? | Donald Walton |
| 13:34 | RE: Failed to build ecos - redboot | Bhanu Prakash Adhikari |
| 13:20 | Re: Failed to build ecos - redboot | Gary Thomas |
| 12:51 | Failed to build ecos - redboot | Bhanu Prakash Adhikari |
| 12:10 | Failed to build ecos - redboot | Bhanu Prakash Adhikari |
| 10:58 | config tool problem | mk79 |
| 09:48 | SPI support for AT91SAM7XEK. | Chirag shah |
| 04:40 | Re: to find whether my board uses redboot_RAM.ecm or redboot_ROM.ecm | tejas pawaskar |
| 04:02 | Accessing serial UART 0 and 1 in AT91SAM7XEK. | Chirag shah |
February 25, 2007
| 14:47 | Re: IDE/ATA Support in Ecos? | Andrew Lunn |
| 00:50 | IDE/ATA Support in Ecos? | Chuck McManis |
February 24, 2007
| 17:03 | Re: typo in i2c example in reference manual? | Grant Edwards |
| 15:52 | Re: typo in i2c example in reference manual? | Grant Edwards |
| 14:00 | Re: how to access serial driver for UART1 and 2. | Andrew Lunn |
| 11:29 | Help, Microwindows starting fails after CVS update | David Luca |
February 23, 2007
| 20:40 | Re: Well its working but ... | Chuck McManis |
| 13:47 | RE: to find whether my board uses redboot_RAM.ecm or redboot_ROM.ecm | Bhanu Prakash Adhikari |
| 13:42 | Re: to find whether my board uses redboot_RAM.ecm or redboot_ROM.ecm | Gary Thomas |
| 13:33 | to find whether my board uses redboot_RAM.ecm or redboot_ROM.ecm | Bhanu Prakash Adhikari |
| 12:19 | Re: Well its working but ... | Gary Thomas |
| 12:06 | Re: Well its working but ... | Gary Thomas |
| 06:22 | Well its working but ... | Chuck McManis |
| 04:28 | Re: typo in i2c example in reference manual? | Grant Edwards |
| 03:00 | MACs and autopoll | Chuck McManis |
| 02:49 | Re: N00blet question on networking | Chuck McManis |
| 02:43 | Re: N00blet question on networking | Chuck McManis |
February 22, 2007
| 22:53 | Re: Re: typo in i2c example in reference manual? | Bart Veer |
| 22:04 | Unrecognized platform | Gilles L. |
| 14:43 | SPI on AT91 | Julien Stéphane |
| 13:00 | Re: How to apply patch | Gary Thomas |
| 12:42 | How to apply patch | Julien Stéphane |
| 12:09 | Re: About AT91RM9200 on ecos. | Gary Thomas |
| 12:04 | Re: N00blet question on networking | Gary Thomas |
| 10:17 | fail over mechanism strategy (Avila IXP425 ) - need suggestion | Bhanu Prakash Adhikari |
| 06:50 | RE: and another thing .. | Laurie Gellatly |
| 06:28 | Re: and another thing .. | Chuck McManis |
| 04:21 | Re: and another thing .. | Laurie.Gellatly |
| 04:05 | Re: and another thing .. | Chuck McManis |
| 03:52 | Re: and another thing .. | Laurie.Gellatly |
| 03:47 | Re: N00blet question on networking | Laurie.Gellatly |
| 03:46 | and another thing .. | Chuck McManis |
| 03:20 | N00blet question on networking | Chuck McManis |
February 21, 2007
| 15:20 | FROM: MRS. KARLIJN JOHNSON, | FROM : MRS . KARLIJN JOHNSON , |
| 13:03 | Re: Submitting patches / updates | Andrew Lunn |
| 10:27 | need the correct template & packages for ppp | shobhit saxena |
| 10:04 | RE: building and debugging | Laurie Gellatly |
| 09:19 | How to temporarily hijack console serial port | Tim Hatton |
| 07:45 | Re: GDB stops randomly | Dave Lawrence |
| 06:37 | Submitting patches / updates | Chuck McManis |
February 20, 2007
| 19:32 | Re: building and debugging | Andrew Lunn |
| 15:39 | Query about usb_ethernet package in eCos | Imran Khan |
| 13:53 | Re: Code examples repository eCos/AT91M55800A | Gilles L. |
February 19, 2007
| 17:34 | Re: typo in i2c example in reference manual? | Grant Edwards |
| 17:09 | Re: typo in i2c example in reference manual? | Bart Veer |
| 07:23 | building and debugging | Laurie Gellatly |
February 18, 2007
| 23:03 | How to tell if scheduler has been started? | Grant Edwards |
| 21:56 | Re: i2c questions | Grant Edwards |
| 18:57 | Re: i2c questions | Grant Edwards |
| 17:51 | i2c questions | Grant Edwards |
February 17, 2007
| 16:50 | typo in i2c example in reference manual? | Grant Edwards |
February 16, 2007
| 20:46 | Mobile IP support | Frank Eisenack |
| 16:45 | eCos upgrade from pre-2.0 to CVS: painless! | Rutger Hofman |
| 16:02 | Re: building openssl | Rutger Hofman |
| 15:47 | Re: How to add a 4th termios driver? | Tim Hatton |
| 15:24 | Re: How to add a 4th termios driver? | Gary Thomas |
| 15:17 | How to add a 4th termios driver? | Tim Hatton |
| 14:03 | Re: Unicast support | Gary Thomas |
| 13:49 | Unicast support | Frank Eisenack |
| 10:56 | EB40 Virtual Vector Table | Carlos Losada |
February 15, 2007
| 19:31 | Re: pthread processor binding | Andrew Lunn |
| 19:28 | Re: pthread processor binding | Andrew Lunn |
| 18:05 | Re: pthread processor binding | Ahmed Abdelkhalek |
| 18:01 | Re: pthread processor binding | Ahmed Abdelkhalek |
| 13:34 | Re: pthread processor binding | Andrew Lunn |
| 13:16 | Re: Operation timed out | Gary Thomas |
| 13:10 | Re: Operation timed out | Andrew Lunn |
| 11:23 | Re: Operation timed out | Nick Garnett |
| 10:59 | Re: pthread processor binding | Nick Garnett |
| 10:29 | Operation timed out | Srinivas rao |
| 09:45 | ping_test problem | Srinivas rao |
| 08:52 | AW: AW: Installing eCos in Windows | Ram Sudhir Tadavarthi |
| 02:28 | Re: pthread processor binding | Ahmed Abdelkhalek |
| 00:45 | Re: pthread processor binding | Andrew Lunn |
| 00:08 | pthread processor binding | Ahmed Abdelkhalek |
February 14, 2007
| 21:58 | Re: GDB does not stop at breakpoint | Mike Arthur |
| 13:40 | AW: Installing eCos in Windows | Ram Sudhir Tadavarthi |
| 13:34 | Installing eCos in Windows | Imran Khan |
| 08:43 | GDB does not stop at breakpoint | Carlos Losada |
| 08:33 | RE: STP doesn't work? | wang cui |
| 08:25 | STP doesn't work? | wang cui |
February 13, 2007
| 14:42 | Re: Opensll issues | Steve West |
| 12:48 | Re: About eCos GUI | Andrew Lunn |
| 10:32 | Re: Critical memory usage cause application keep reboot? | wang cui |
| 10:30 | Re: Critical memory usage cause application keep reboot? | Bart Veer |
| 09:13 | RE: Problems building host infrastructure in MinGW | David Fernandez |
| 08:39 | Critical memory usage cause application keep reboot? | wang cui |
| 05:34 | About eCos GUI | M Arshad Khan |
| 02:24 | Re: Error when write a uint32 with not aligned pointer. | wang cui |
February 12, 2007
| 22:48 | Re: Problems building host infrastructure in MinGW | Bart Veer |
| 21:03 | Opensll issues | Steve West |
| 19:11 | Re: protected boot startup 2nd stage pc boot | Steve West |
| 19:02 | Re: protected boot startup | Bart Veer |
| 16:30 | Re: Does i2c module work in RedBoot? | Grant Edwards |
| 16:27 | Re: Re: Does i2c module work in RedBoot? | Bart Veer |
| 16:24 | Reload ESA from EEPROM (Rhine ethernet drivers) | Guillaume Menant |
| 15:25 | Re: Does i2c module work in RedBoot? | Grant Edwards |
| 12:13 | Re: Error when write a uint32 with not aligned pointer. | Gary Thomas |
| 09:58 | hal_virtual_vector_table (Resolved) | Guillaume Menant |
| 09:50 | hal_virtual_vector_table | Guillaume Menant |
| 05:36 | Re: Training on eCos | Harsha |
| 05:34 | Error when write a uint32 with not aligned pointer. | wang cui |
| 04:17 | RE: Does i2c module work in RedBoot? | wang cui |
| 02:51 | Does i2c module work in RedBoot? | Grant Edwards |
February 11, 2007
| 15:09 | Re: Training on eCos | Andrew Lunn |
| 07:50 | Re: Training on eCos | tejas pawaskar |
February 10, 2007
| 14:01 | Training on eCos | Harsha |
February 09, 2007
| 17:51 | Re: CVS access connection refused | Gary Thomas |
| 17:48 | CVS access connection refused | Kevin Wilson |
| 08:34 | eCos drivers for Rhine III ethernet board | Guillaume Menant |
| 06:50 | Using VNC with eCos | M Arshad Khan |
| 03:11 | eCos on heterogeneous MP platform | Ahmed Abdelkhalek |
February 08, 2007
| 21:09 | protected boot startup | Steve West |
| 19:41 | Re: EMAC at91 support package | Andrew Lunn |
| 17:19 | Re: EMAC at91 support package | Andrea Visinoni |
| 13:24 | Re: EMAC at91 support package | Andrew Lunn |
| 13:06 | Re: EMAC at91 support package | Uwe Kindler |
| 11:46 | RE: RE: Problems building configtool with cygwin | David Fernandez |
| 11:21 | Re: SIGSEGV while writing through PCI to Ethernet board IO space | Andrew Lunn |
| 11:18 | Re: about AT91SAM7XEK . | Andrew Lunn |
| 10:15 | SIGSEGV while writing through PCI to Ethernet board IO space | Guillaume Menant |
| 09:29 | Re: EMAC at91 support package | Andrea Visinoni |
| 08:51 | Re: EMAC at91 support package | Andrew Lunn |
| 08:45 | Re: CYGBLD_REDBOOT_FILEIO_WITH_LS is a empty CDL option? | Andrew Lunn |
| 08:17 | EMAC at91 support package | Andrea Visinoni |
| 08:14 | CYGBLD_REDBOOT_FILEIO_WITH_LS is a empty CDL option? | wang cui |
| 06:09 | Re: httpd running on LWIP over SLIP using eCos. | dudafunk |
February 07, 2007
| 21:55 | Re: Re: Usefulness of CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS | Christopher Cordahi |
| 17:39 | Re: Re: Usefulness of CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS | osv |
| 16:33 | Re: Usefulness of CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS | Christopher Cordahi |
| 14:11 | Re: Again with AT91SAM7X-EK | Andrew Lunn |
| 14:03 | Re: Again with AT91SAM7X-EK | Andrea Visinoni |
| 14:03 | Re: Again with AT91SAM7X-EK | Da |
| 13:23 | Re: Again with AT91SAM7X-EK | Andrea Visinoni |
| 13:04 | Re: Again with AT91SAM7X-EK | Andrew Lunn |
| 12:49 | Re: Again with AT91SAM7X-EK | Andrea Visinoni |
| 12:07 | Re: Again with AT91SAM7X-EK | Andrew Lunn |
| 11:49 | RE: Problems building configtool with cygwin | David Fernandez |
| 11:20 | Re: Usefulness of CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS | Sergei Organov |
| 11:07 | Re: Again with AT91SAM7X-EK | Andrea Visinoni |
| 11:06 | reading the PCI configuration base address | Srinivas rao |
| 09:33 | Re: about SAM7xEK . . . | Andrew Lunn |
| 09:13 | Re: Again with AT91SAM7X-EK | Andrew Lunn |
| 08:50 | Again with AT91SAM7X-EK | Andrea Visinoni |
| 07:15 | select() problem in lwip stack | Imran Khan |
February 06, 2007
February 05, 2007
| 23:03 | Re: How to use CAN in poll mode? | Mike Arthur |
| 22:53 | Re: Re: eCos, termio and sockets | Andre-John Mas |
| 22:27 | Re: eCos, termio and sockets | Gary Thomas |
| 22:23 | eCos, termio and sockets | Andre-John Mas |
| 21:25 | RE: Problems building configtool with cygwin | John Dallaway |
| 17:43 | RE: Problems building configtool with cygwin | David Fernandez |
| 17:34 | Re: Problems building configtool with cygwin | John Dallaway |
| 17:03 | Problems building configtool with cygwin | David Fernandez |
| 13:45 | Re: GDB stops randomly | Donald Walton |
| 11:43 | Re: GDB stops randomly | Andrew Lunn |
| 11:14 | GDB stops randomly | Carlos Losada |
| 07:27 | Re: eCos JFFS2 file system poor performance.. | Andrew Lunn |
| 07:13 | eCos JFFS2 file system poor performance.. | shailesh lomate |
| 05:43 | How to use CAN in poll mode? | wang cui |
February 03, 2007
| 15:28 | Re: LPC2XXX: Spurious Interrupts Issue | Gary Thomas |
| 14:37 | Re: LPC2XXX: Spurious Interrupts Issue | wang cui |
| 14:20 | Re: LPC2XXX: Spurious Interrupts Issue | Sergei Gavrikov |
| 13:53 | Re: LPC2XXX: Spurious Interrupts Issue | Gary Thomas |
| 01:31 | Re: LPC2XXX: Spurious Interrupts Issue | wang cui |
February 02, 2007
February 01, 2007
| 20:19 | Re: eCos Thread Constraints | Andrew Lunn |
| 20:16 | eCos Thread Constraints | Potdar Smita |
| 18:51 | Re: In-built shell for Redboot | Sergei Gavrikov |
| 17:37 | Re: LPC2XXX: Spurious Interrupts Issue | Sergei Gavrikov |
| 17:23 | Re: In-built shell for Redboot | Harish Talanki |
| 16:03 | Re: eCos in a floppy | Andrew Lunn |
| 15:17 | RTEMS FTP server for eCos | Anders Ejdeling |
| 15:00 | eCos in a floppy | Zorrilla Mikel Joseba |
| 11:52 | RE: In-built shell for Redboot | Chris Zimman |
| 11:41 | Re: In-built shell for Redboot | Andrew Lunn |
| 10:08 | RE: In-built shell for Redboot | Chris Zimman |
| 09:25 | Re: How to solve this issue? | Andrew Lunn |
| 09:21 | How to solve this issue? | Lucky_07 |
| 07:48 | Re: In-built shell for Redboot | Andrew Lunn |
| 02:28 | Re: LPC2XXX: Spurious Interrupts Issue | wang cui |
| 02:10 | Re: Multi-cast mode warning | wang cui |
| 01:56 | Re: In-built shell for Redboot | wang cui |
| 01:40 | Re: Building JFFS2 on net template fails | wang cui |
Indexes: [Date Index] [Subject Index] [Author Index] [Thread Index] Site Nav: [Browse other archives for this mailing list]
[Browse other mailing lists at this site]