This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Again with AT91SAM7X-EK


Scrive Andrea Visinoni <andrea@puntualmenteinritardo.com>:

> Scrive Andrew Lunn <andrew@lunn.ch>:
>
> > > -I- Send File M:/main.bin at address 0x100000
> > > -I- File size = 24820 byte(s)
> > > (Desktop) 1 % eval FLASH::ScriptGPNMV 4
> > > -I- Boot from Flash selected
> >
> > The address is O.K.
> >
> > So try one of the standard tests and see if it outputs anything on the
> > serial ports. 38400 baud. I think the DBG port is used by default, but
> > i could be wrong.
> >
> >   Andrew
> >
> Hooray! it works, i tried with several test and all off them pass and output
> on
> dbgu port at 38400baud.
> Maybe then i'm doing something wrong in compilation? i've used Build_makefile
> to
> generate the makefile.
> however i'll take a look at the tests code.
> Thanks again
> Andrea
I also tried to put the code you provide me to light the led, inside the basic.c
test code, but nothing appens.
Andrea



----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]