This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: -- MPC8248 port
- From: anoop r <anoopsix at yahoo dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Wed, 7 Mar 2007 23:00:03 -0800 (PST)
- Subject: Re: [ECOS] -- MPC8248 port
- References: <9328880.post@talk.nabble.com>
Hi,
i got some output one the serial por configured using SCC1. was just a
bit of timing issues. no whats happening is that the first redboot promt
appears, but the board isnt taking any input and still goes into an infinte
loop. this happens in the function "mon_read_char_with_timeout.
oh yes, this port os from the mpc8260 based VADS board configuration.
thanls in advance
anoop r wrote:
>
>
> Hi,
> i'm trying to port ecos to the MPC8248 based EP8248e board. it had
> linux
> on-board previously. i used the variant hal from the rattler port. i'm
> stuck
> at a point where the SMC is initialised and the control has reached
> cyg_start. now diag_printf goes into an inifinite loop waiting for the
> transmit buffer to get ready. it is happening in the function
> "cyg_hal_plf_serial_putc".
>
> thanks
> anoop.
> --
> View this message in context:
> http://www.nabble.com/---MPC8248-port-tf3354408.html#a9328880
> Sent from the Sourceware - ecos-discuss mailing list archive at
> Nabble.com.
>
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
>
--
View this message in context: http://www.nabble.com/---MPC8248-port-tf3354792.html#a9369508
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss