This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: LPC2106 iar kickstart eval board port

From: Andrew Lunn <andrew at lunn dot ch>
To: Alexandre <thekyz at gmail dot com>
Cc: ecos-discuss at ecos dot sourceware dot org
Date: Wed, 13 Jun 2007 18:48:46 +0200
Subject: Re: [ECOS] LPC2106 iar kickstart eval board port
References: <d5aafeec0706130712l134a86b3pe5989437e97841e@mail.gmail.com> <20070613141936.GA4635@lunn.ch> <d5aafeec0706130844u31b4b610yeac5e6406e7f555a@mail.gmail.com> <20070613160207.GB4635@lunn.ch> <d5aafeec0706130930v4fca6847te76560e8ff8f53f@mail.gmail.com>

On Wed, Jun 13, 2007 at 06:30:40PM +0200, Alexandre wrote:
> Thx a lot i'll try that at work.
> So the .elf i obtain from the arm-elf-objcopy command isn't good ?
> What do i have to do to make the actual file i'll upload to my board ?

I depends on the tools you are using to upload to the board. Does your
JTAG programmer support elf? Does it want ihex? Just use objcopy to
get one of the supported formats.

    Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Follow-Ups:
- Re: LPC2106 iar kickstart eval board port
  - From: Alexandre

References:
- LPC2106 iar kickstart eval board port
  - From: Alexandre
- Re: LPC2106 iar kickstart eval board port
  - From: Andrew Lunn
- Re: LPC2106 iar kickstart eval board port
  - From: Alexandre
- Re: LPC2106 iar kickstart eval board port
  - From: Andrew Lunn
- Re: LPC2106 iar kickstart eval board port
  - From: Alexandre

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]