This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
ixdp425 w/ Spansion Flash
- From: "Semeraro, Greg" <gsemeraro at vanteon dot com>
- To: <ecos-discuss at ecos dot sourceware dot org>
- Date: Tue, 31 Jul 2007 15:08:43 -0400
- Subject: [ECOS] ixdp425 w/ Spansion Flash
I'm trying to build RedBoot v2.04 for the ixdp425 development board but
with a Spansion (AMD) Flash - we have a board with the same design but
with a 29SGL512N flash instead of the Intel Strata flash. All I need to
do (I think) is add the flash_amd_am29xxxxx (or flash_amd_am29xxxxx_v2)
package and remove the flash_ixdp425 and strata packages. I have tried
in vain to do this. If I add the flash_amd_am29xxxxx package I get
unresolved references (to flash_lock, flash_unlock, etc) - this makes
sense to me because there is not src directory in that dev subtree for
the package. If I use flash_amd_am29xxxxx_v2 I get many, many
compilation errors as if it is not including a header or there are
#defines that are not defined. I have never used RedBoot before and the
entire build / configuration process has been stumped. I can build the
default RedBoot from the Intel website. I thought I was doing the right
thing by removing the packages I don't need and adding the package that
I do need but apparently there is more to it than that. Any assistance
would be greatly appreciated.
Greg
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss