This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: eCOS on MPC5567 - printf() - SOLVED
- From: "Alexander Bochem" <abochem at googlemail dot com>
- To: ecos-discuss at ecos dot sourceware dot org
- Date: Thu, 9 Aug 2007 15:48:48 +0200
- Subject: [ECOS] Re: eCOS on MPC5567 - printf() - SOLVED
Sry again,
I was much too quick with my last post. The printf works correct.
So in the end the problem was my much to old version of
Trace-debugging-software.
cu
Alex
2007/8/9, Alexander Bochem <abochem@googlemail.com>:
> Hi @all,
>
> the problem was that the version of the debugger that I am using was
> to old. The debugger was not able to understand the debug-symbols
> which were send during flashing-process.
> A simple update to the current version of Trace32-debugger for ppc5500
> architecture can fix it.
>
> Now I can use printf but it is the same result as using sprintf
> before. I don't get the output on serial port. It seems the MPC does
> write the output to a unknown space in memory instead of sending it.
>
> cu
> Alex
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss