This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: AT91SAM7SEK and USB-SLAVE


I?ve created test USB package (only package
directories and definition without any C-code).
testusb.cdl looks like below:
?
cdl_package CYGPKG_TEST_USB {
    display       "Test USB"
    description   "Test USB"
    implements  CYGPKG_IO_USB
    implements  CYGPKG_IO_USB_SLAVE
    implements  CYGINT_IO_USB_SLAVE_CLIENTS 

    cdl_component CYGPKG_TEST_USB_DEVICES {
        display       "Test USB dev"
        flavor        bool
        default_value 1
        description   "Test USB dev"
    }

}
?.
Next I?ve added the package to ecos.db and to my
project. But still, when I?m trying to enable ?Support
the control endpoint 0?, I?ve got conflict ?? requires
CYGPKG_IO_USB CYGPKG_IO_USB_SLAVE?. 
To solve that, I?ve tried to add ?USB slave-side
support? and ?USB Support? but the configuration tool
rejected that, because of hardware property.
Do I need to add these two packages?
How to solve CYGPKG_IO_USB CYGPKG_IO_USB_SLAVE
problem?
I?m used at91sam7sek template.

Pete

> On Tue, Jul 03, 2007 at 02:33:39PM -0700, wavecom
> wavecom wrote:
> > Hi,
> > 
> > I'm trying to configure usb-slave with the
> AT91SAM7SEK
> > template. So I've enabled USB and ?Atmel AT91 USB
> > Device Driver? and ?Support the control endpoint
> 0?.
> > But in conflict list I've got that
> > CYGFUN_DEVS_USB_AT91_EP0 Requires CYGPKG_IO_USB 
> > CYGPKG_IO_USB_SLAVE. So I 've found a patch:  ?
> >
>
http://www.mail-archive.com/ecos-patches@ecos.sourceware.org/msg00355.html
> > ?. I was trying to patch the usbs_at91.cdl,  but 
> in
> > my  usbs_at91.cdl (# Date:           2006-02-25) 
> is ?
> >        default_value CYGINT_IO_USB_SLAVE_CLIENTS?
> just
> > like in + in the patch 
> > ?
> > -        calculated    CYGINT_IO_USB_SLAVE_CLIENTS
> > +        default_value CYGINT_IO_USB_SLAVE_CLIENTS
> > ?
> > How to solve the usb-slave problem?
> 
> What it is trying to tell you is that there is no
> client software
> using the USB, so there is no need to compile the
> USB stack. So it
> does not compile it.
> 
> You either need to include/write a package which
> uses the USB package
> and implements the CDL interface
> CYGINT_IO_USB_SLAVE_CLIENTS, or you
> need to set option CYGGLO_IO_USB_SLAVE_APPLICATION
> and you application
> code can the use the USB slave functions.
> 
>      Andrew
> 



      ____________________________________________________________________________________
Park yourself in front of a world of choices in alternative vehicles. Visit the Yahoo! Auto Green Center.
http://autos.yahoo.com/green_center/ 

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]