This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: [Fwd: AT91SAM7SE DMA with external SDRAM]
- From: <jc dot caquet at kerlink dot fr>
- To: "'Andrew Lunn'" <andrew at lunn dot ch>, "'eCos discussion'" <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 21 Sep 2007 14:23:20 +0200
- Subject: RE: [ECOS] [Fwd: AT91SAM7SE DMA with external SDRAM]
-----Message d'origine-----
De?: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] De la part de Andrew Lunn
Envoyé?: vendredi 21 septembre 2007 13:20
À?: eCos discussion
Objet?: Re: [ECOS] [Fwd: AT91SAM7SE DMA with external SDRAM]
> From: jc.caquet@kerlink.fr
> To: ecos-discuss-owner@ecos.sourceware.org
> Subject: AT91SAM7SE DMA with external SDRAM
> Date: Fri, 21 Sep 2007 10:08:45 +0200
> X-Spam-Status: No, score=2.9 required=5.0 tests=AWL,BAYES_60,
> MSGID_FROM_MTA_ID,NO_REAL_NAME autolearn=no version=3.0.4
>
> Dear all,
> we are facing a pb when sending data over serial link on AT91SAM7SE-EK
> board. We use external SDRAM connected on EBI, this SDRAM is OK as we made
> some intensive read/write tests over the whole memory.
This might not be conclusive. The DMA engine could be doing a
different type of memory access as to normal reads/writes.
> Does anybody know if there are some restrictions/bugs when using DMA with
> external memory connected on EBI ?
You should probably be asking Atmel....
Andrew
We just got an answer from ATMEL, this pb has already been reported, they
're looking for a workaround.
JC
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss