This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: How to enable USB on IXP425 GRG
- From: "Navya S Kamath" <navya at coreel dot com>
- To: <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 23 Nov 2007 17:57:25 +0530
- Subject: RE: [ECOS] How to enable USB on IXP425 GRG
Hi,
I created a driver package for USB on IXP425. I have modified the ecos.db to
include the USB package. Similarly I have edited the .ecm files for the
board. But while compiling the image the driver source is not compiled.Is
there any other change to be made?
Please help
Regards,
Navya
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Andrew Lunn
Sent: Saturday, November 17, 2007 11:16 PM
To: Navya S Kamath
Cc: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] How to enable USB on IXP425 GRG
On Sat, Nov 17, 2007 at 02:19:02PM +0530, Navya S Kamath wrote:
> Hi Andrew,
>
> The USB 1.1 interface on ADI board is built around the on-chip USB
> controller and can work only as the USB peripheral at 12 Mbps data rate.
>
> Is the driver already available for the in build USB of IXP425?
Not that i know of which is why i said you need to write a driver.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss